| nkọwa | HMC630 |
| Nha tebụl ọrụ (mm) | 630*630 |
| Ibu ibu kachasị na tebụl ọrụ (kg) | 950 |
| Nha oghere T (Mm/ibe) | |
| Oke njem axis X (mm) | 1050 |
| Axis Y kacha njem (mm) | 750 |
| Axis Z kacha njem (mm) | 900 |
| Anya site na nsọtụ spindle ihu ruo worktable center(mm) | 130-1030 |
| Anya site na spindle center ruo na tebụl ọrụ(mm) | 130-650 |
| Mpempe akwụkwọ mpịakọta (7:24) | BT50 φ190 |
| Ogo nke ọsọ spindle (r/min) | 6000 |
| Ike moto (kW) | 15 |
| Ọsọ inye nri ngwa ngwa: axis X (m/min) | 20 |
| Ọsọ nri ngwa ngwa: axis Y (m/min) | 12 |
| Ọsọ nri ngwa ngwa: axis Z (m/min) | 20 |
| ọsọ nri (mm/min) | 1-10000 |
| Nhazi ihe ngbanwe ngwaọrụ | ogwe aka ụdị akpaaka ngwá ọrụ mgbanwe |
| Ọdịnaya ATC (ibe) | 24 |
| Oge mgbanwe ngwá ọrụ | 2.5 |
| Ụkpụrụ ule ziri ezi | JISB6336-4: 2000/ GB/T18400.4-2010 |
| Axis X/Y/Z (mm) | ±0.008 |
| Axis X/Y/Z Tinyegharịa izi ezi ọnọdụ (mm) | ±0.005 |
| Nha (ogologo × obosara × ịdị elu) (mm) | 5300*3700*2900 |
| Ibu igwe (kg) | 10000 |
1. Ntinye ngwaahịa na ngwa ngwa igwe a bụ ụdị kọlụm na-akpụ akpụ na-akpụ akpụ na etiti machining.Magazin akụrụngwa na-anabata akwụkwọ akụkọ akụrụngwa ụdị diski ma nwee tebụl ọrụ CNC na-ekesa nhata.Ọ nwere ike ịghọta nchikota igbe dị iche iche, shells, molds na akụkụ ndị ọzọ dị mgbagwoju anya, wee mezue usoro dị iche iche dị ka igodo, mkpọ ala, igwe igwe, ịgbasa, ịkwagharị na ịpị.
2. Main Structural Features 1. Isi akụkụ ndị dị ka isi, worktable, kọlụm, doo, slide oche, na spindle igbe bụ nke HT300 nkedo ígwè, igbe ụdị Ọdịdị, na kọmpat na ezi uche symmetrical ọgịrịga Ọdịdị ana achi achi na elu rigidity. nke isi akụkụ na mgbochi ekwe na ujo absorption arụmọrụ;A na-eme akụkụ ndị bụ isi nke ájá resin ma nweta ọgwụgwọ ịka nká zuru oke, nke na-enye nkwa maka nkwụsi ike nke ọrụ igwe na-arụ ọrụ ogologo oge.2. X, Y (nke kwụ ọtọ), Z ụzọ ụgbọ okporo ígwè atọ, nke 4 na-eduzi okporo ụzọ na X-axis;Elu;servo moto na-ejikọta ya na nkedo ndu site na njikọ na-agbanwe agbanwe, na moto servo feed na-ebufe ike na nkenke bọlbụ dị elu iji hụ na nhazi nke ọma nke ngwá ọrụ igwe;4. Nkwado ịghasa ndu na-anabata ihe pụrụ iche maka ịghasa ndu na pre-tensioned Ọdịdị mgbatị ahụ na-ebelata mmetụta nke nrụrụ okpomọkụ na izi ezi nke ngwa igwe n'oge ọrụ ogologo oge.●6.The spindle igbe na-onwem na akpaka itule usoro, nke ana achi achi machining ziri ezi nke igwe ngwá;●7.Ọ na-eji ngwaọrụ mmanu mmanu akpaka nke etiti dị elu, nke a na-etinye mmanụ na-akpaghị aka mgbe niile na ọnụọgụ, yana ọrụ ahụ kwụsiri ike na ntụkwasị obi;●8.A na-ebubata ngwá ọrụ igwe a ma ama CNC njikwa njikwa nwere ọrụ zuru oke, ọrụ dị mfe, nkwụsi ike na ntụkwasị obi.
Oge nzipu: Jun-22-2022