Nke a CK6130 cnc lathe igwe na-eji GSK928 njikwa usoro,6 ọdụ eletriki ngwá ọrụ post; hydraulic Chuck; auto bar feeder;
Njirimara nke igwe lathe CK6130 cnc a:
1. Ihe nkedo ahụ na-anabata teknụzụ resin ájá, nke nwere ezigbo nguzogide abrasion, na ike nke okporo ụzọ nduzi mgbe egweri dị mma karịa 52 °.
2. The ogologo-akara ngwá ọrụ post nwere elu na-arụ ọrụ arụmọrụ, na nkenke bọọlụ ịghasa ụzọ bụ ihe ziri ezi;
3. Pneumatic, akwụkwọ ntuziaka integrated mmiri chuck, na nhọrọ hydraulic clamping ngwaọrụ, adaba, ngwa ngwa, oge na-azọpụta na-azọpụta ọrụ;
4. Centralized lubricating mmanụ sekit, lubrication bụ ihe na ebe.
5. A na-akwado ogwe isi site na nkedo dị elu na nke siri ike.Ọ na-anabata ụdị clamps abụọ, ya bụ, elastic chuck or chuck, ma nwee ọtụtụ ụzọ njigide dị ka pneumatic, hydraulic na akwụkwọ ntuziaka.
6. The spindle adiana adopts stepless ọsọ iwu.
Nkọwapụta:
| Mpempe akwa akwa obere CNC Lathe Machine CK6130 | |
| Ihe | CK6130 |
| Oke.swing dia.n'elu akwa | 320mm |
| Oke.swing dia.n'ofe cross slide | 100mm |
| Oke.ogologo nhazi | 400mm (collet) |
| Dia.nke oghere spindle | 48mm |
| Site oghere dia.nke ịbịaru ọkpọkọ | 41mm |
| Ọsọ spindle | 50-3000 rpm |
| Ihe njide | njide ngwá ọrụ ụdị òtù |
| Ngalaba ogwe ngwaọrụ | 20×20 16X16mm |
| Isi moto ike | 4kw |
| X/Z axis njem stoke(mm) | 300/380 |
| X/Z axis ọsọ inye nri ngwa ngwa | 8/10 m/min |
| Ọkwa axis X/Z ziri ezi (mm) | 0.01/0.015 |
| X/Z-axis ikwugharị(mm) | 0.012/0.013 |
| Ịkụgide | Hydraulic kollet |
| Ogologo aka uwe dia. | 60mm |
| Tailstock aka uwe njem | 100mm |
| Tailstock taper | MT4 |
| Akụkụ | 1750X1200X1570 |
| ibu | 1220kg |
Oge nzipu: Dec-30-2021