| Ihe | Nkeji | CK61125 |
| Oke.na-efegharị n'elu akwa | mm | 1250 |
| Obosara okporo ụzọ nduzi akwa | mm | 1100 |
| Oke.ogologo nhazi | mm | 5000 |
| Oke.swing dia.n'ofe cross slide | mm | 900 |
| Dayameta Chuck | mm | Φ1000;4 agba; akwụkwọ ntuziaka, oghere |
| spindle amụ | mm | 130mm |
| Ihe eji eme ihe eji eme ihe |
| Mgbanwe ngwa ngwa eji aka |
| Oke ọsọ spindle | r/min | 4.5-40 / 16-150 / 50-450 |
| Isi ike | KW | 30 |
| X/Z axis Ọsọ na-agba ọsọ ọsọ | m/min | 4/8 |
| Ogo nke ọsọ ndepụta | mm/min | X: 1-2000 Z: 1-2000 |
| Ntugharị izu ike nke ngwaọrụ yana izi ezi n'ọkwa ugboro ugboro | mm | 0.008 ″ |
| X/Z axis ọrịa strok | mm | 625/1000 |
| Izizi nke workpiece |
| IT6-IT7 |
| Arụ ọrụ n'elu roughness | μm | Ra1.6 |
| Ndokwa izi ezi/na-ekwughachi izi ezi n'ọkwa | mm | 0.007/0.01 |
| Ọdụdọ ọdụ | / | Ọdụ ụgbọ mmiri hydraulic |
| Dayameta nke ọdụ ụgbọ mmiri quill | mm | 160 |
| Dayameta aka oche ọdụ ọdụ / ọrịa strok | mm | 250 |
| Taper nke ọdụ ụgbọ mmiri | / | MT 6 |
| Ihe nbipute ngwaọrụ |
| 8 ọdụ eletriki ngwaọrụ post |
| Nha ngwá ọrụ | mm | □ 40×40 |
| Ibu igwe | 18000kG | |
Njirimara
1. A na-atụba ahụ igwe ahụ nke ọma, na-enwe nnukwu oghere nke ihe ndina 1.1 mita, okporo ụzọ nduzi ihe ndina sara mbara, na nkwụsị ọkụ dị elu.
2. The dayameta nke site oghere bụ 130mm, nke nwere ike hazie ibu metal ihe
3. Isi ihe eji eme ihe nke igwe na-eji ihe eji eme ihe, na ihe eji eme ihe na-eme ka ichikota nkenke, nke ka mma na-ekwe nkwa ike nke ihe eji eme ihe ma na-ebelata mkpọtụ nke igwe igwe.
4. Isi ihe eji eme ihe nke igwe na-eji ihe eji eme ihe, na ihe eji eme ihe na-eme ka ichikota nkenke, nke ka mma na-ekwe nkwa siri ike nke ihe eji eme ihe ma na-ebelata mkpọtụ nke igwe igwe.
Oge nzipu: Feb-13-2023