Igwe vmc1060 emechaala ma tinye ya n'ime akpa dị n'ụkwụ 40
Nhazi nke vmc1060 a: GSK njikwa usoro, 5th axis, linear guide way, 16 ngwaọrụ ụdị ATC.
Mgbe ndị ọrụ mmepụta ọkachamara jiri nlezianya gbakọta debugging na ule dị mma, site na ọdịdị nke ngwá ọrụ na arụmọrụ zuru ezu, gafere usoro nyocha nke ọma, kwe ka nnyefe!
| Ihe | VMC1060 |
| Nha nke worktable (ogologo × obosara) mm | 1300×600 |
| T oghere (mm) | 5-18 × 100 |
| Ibu ibu kachasị na tebụl ọrụ (KG) | 1000 |
| Njem X-Axis (mm) | 1000 |
| Njem Y-Axis (mm) | 600 |
| Njem Z-Axis (mm) | 600 |
| Ebe dị anya n'etiti imi spindle na tebụl (mm) | 100-700 |
| Anya n'etiti spindle center na kọlụm (mm) | 667 |
| Spindle taper | BT40 |
| Oke.spindle ọsọ (rpm) | 8000/10000/12000 |
| Ike moto (Kw) | 11/15 |
| Ọsọ inye nri ngwa ngwa: axis X,Y,Z (m/min) | 16/16/16 (24/24//24 akwụkwọ ntuziaka) |
| Ọsọ igbutu ngwa ngwa (m/min) | 10 |
| Izi ezi ọnọdụ (mm) | ±0.005 |
| Tinyegharịa izi ezi ọnọdụ (mm) | ±0.003 |
| Ụdị mgbanwe ngwá ọrụ akpaaka | 16 ngwaọrụ isi ụdị ngwá ọrụ mgbanwe (nhọrọ 24 ogwe aka ụdị akpaaka ngwá ọrụ mgbanwe) |
| Oke.ogologo ngwá ọrụ (mm) | 300 |
| Oke.Dayameta ngwá ọrụ | Φ80 (ngwaọrụ n'akụkụ)/φ150 (ọ bụghị n'akụkụ ngwá ọrụ) |
| Ibu oke.tool(KG) | 8 |
| Ngwa na-agbanwe oge (ngwaọrụ-gaa-ngwaọrụ) sec | 7 |
| Nrụgide ikuku (Mpa) | 0.6 |
| Ibu igwe (KG) | 7500 |
| Nha n'ozuzu (mm) | 3340*2800*2700 |
Oge nzipu: Nov-26-2021